That is not a recent thing. Home Depot wood has been dripping wet for many years. It's routine to put a screw into it and have water running past the head as you tighten it. I typically buy 50-100% more than I expect to use on the assumption that a good chunk of it will warp as it dries and become useless.
Most of my big diy home construction projects happened to overlap with the pandemic, and when I described the wet lumber problems to a local with more building experience he was so confident their lumber was properly kiln dried he attacked my ability to measure and cut properly...
I'm not sure if I should feel better or worse about the situation knowing home depot has been doing this long before the pandemic.
That wood from Stimson is the worst ever. I don't think you can buy worse. I've used all sorts in my life and HD consistently has lumber that cannot even be used to start fires until you dry it.
Plywood is fine, but if you need anything you build to last, buy pressure treated at HD, or buy plain lumber somewhere else.
(I bought some 2x4s for a non-permanent project during the pandemic. It was so soft and wet that when I fired a railgun into one of the pieces, the nail went all the way through. That should not happen)
Whenever I go to Lowes, I always like to go by the lumber section (even when I'm not there for lumber) just to see how warped the dimensional lumber is. It's always a depressing experience.
That is not a recent thing. Home Depot wood has been dripping wet for many years. It's routine to put a screw into it and have water running past the head as you tighten it. I typically buy 50-100% more than I expect to use on the assumption that a good chunk of it will warp as it dries and become useless.